ACME: Picked up the call from consumers who want a product that meets their expectations but aren’t ready to break the bank. Their entry-level gear is the new industry standard that delivers real performance at the right price.
BASIC: Every other shop selling these has some fancy way of describing the same thing, but take us from us, if it ain’t a Morimoto, it is literally just that: the same thing. Whether you’re shopping on eBay, or Amazon, if you’re looking for a bi-xenon retrofit on a budget: ACME’s standard version of the classic “Mini H1 Bi-xenon” projector is a good buy.
BEAM PATTERN: Producing a classic DOT-stepped cutoff and a decently sharp cutoff, for such an inexpensive projector the light output isn’t half bad!
HIGH / LOW: Their push/pull bi-xenon mechanism creates both a low and high beam pattern when actuated. Although dated, ACME H1 Bi-xenons use the most modern version of the Push/Pull solenoid system found on earlier Morimoto projectors.
EASY INSTALL: The ACME H1 Bi-xenon uses a 20mm threaded mounting shaft for easy retrofitting with a good quality Hex-shaped lock ring made of AL. Their 2.5″ lenses and small body makes them ideal for use in a budget build for a motorcycle or any vehicle with a small headlight housing.
DIRECT: These projectors are factory-direct and do not receive the same level of QC that we’ve come to expect from other brands like Morimoto. However, they’ve got a good track record for little to no problems out of the box, and their pre-installed clear lens should give them a nice sharp and colorful cutoff line and and good output.
H1 ONLY: The ACME H1 projectors are designed for, you guessed it! H1 HID bulbs. Other bulbs will not seat properly or result in the proper light output, so pick yourself up a set to make sure you’ve got it all!
OPTIONAL PRECISION BULB HOLDERS: Designed by Morimoto in California, the new MotoHo1der utilizes a three-piece design that’s way more effective but virtually no bigger overall than the old clip setup. The clever three-piece design provides even pressure on the back of the bulb, ensuring perfect alignment. To be honest, we think it’s the single best upgrade to the projector that’s ever been conceived since it helps make the most of the awesome 7.0’s on the road. Well worth the extra few bucks in the grand scheme of things!
TRUSTED: For more than a decade, we’ve worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet’s best selection of high performance automotive and powersport lighting products at the best prices, and we’ve got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we’ve put it to the test on our own cars, trucks, and bikes.
- PROJECTORS: 2x ACME Standard H1 Bi-xenons
- HARDWARE: Basic mounting hardware / H1 bulb clips
- OPTIONAL PRECISION BULB HOLDERS: Morimoto MotoHo1ders
- WARRANTY: 6 Months
- APPLICATIONS: Universal (cars/trucks/motorcycles)
- DIRECT FITMENT: H4, H7 Headlights (little/no mods req’d)
- MODIFICATION REQUIRED: H1,H11,H13,9005,9006,9007 housings
- BULBS: H1 HID Only
- SHROUDS: All Styles (w/ Centric Rings)
- CENTRIC RINGS: Shrouds Require Mini H1 Model
- FUNCTIONALITY: Low and High Beam (Bi-Xenon)
- TRAFFIC PATTERN: LHD Only
- COMPATIBLE WITH: 35w H1 HID Systems Only
- DEPTH: 139mm (includes bulb holder)
- WIDTH: 88mm
- HEIGHT: 73mm
- LENS DIAMETER: 2.5″
- MOUNTING SHAFT: 20mm Diameter
- HOUSING DEPTH: 115mm Minimum